The NorCal Tuner Upper is a single frequency indicator of when your antenna
is at 50 ohms. It uses a super bright LED as an indicator, and the LED will
go out when the antenna is at 50 ohms. To use it, connect it to your antenna
tuner or antenna in place of your rig. Adjust the antenna until the LED goes
out, and your antenna is now at 50 ohms. Disconnect the Tuner Upper, connect
your rig, and you are ready to transmit. The kit comes in 3 flavors, 7.040
MHz, 10.116 MHz, and 14.060 MHz. You will need to order 1 kit for each band.
 NorCal Tuner Upper manual in PDF format
NorCal Tuner Upper Parts List in PDF format
 Tuner Upperr Schematic
Parts list for other bands
6 meter Modification
6 Meter Modification Schematic
|
Ordering the NorCal Tuner Upper Load
|
Ordering electronically by PayPal
to
using the links below.
NOTE
When an order is placed through PayPal, a confirmation email is immediately
sent by PayPal. We also receive this same email, so please rest assured that we have logged your
order into our books. No other order confirmation will be issued. Your kit will be shipped in
1-2 weeks after our receiving the order, unless otherwise stated. Thanks for your
support.)
Ordering by Mail:
| 20 Meter NorCal Tuner Upper (US) |
$10.00 |
$10.75 |
| 30 Meter NorCal Tuner Upper (US) |
$10.00 |
$10.75 |
| 40 Meter NorCal Tuner Upper (US) |
$10.00 |
$10.75 |
| 20 Meter NorCal Tuner Upper (DX) |
$12.00 |
N/A |
| 30 Meter NorCal Tuner Upper (DX) |
$12.00 |
N/A |
| 40 Meter NorCal Tuner Upper (DX) |
$12.00 |
N/A |
* 8.25% tax included for California residents.
Write check or M.O. payable to
"NorCal QRP Club, Inc." and send to:
NorCal QRP Club, Inc.
c/o Paul Maciel AK1P
1749 Hudson Drive
San Jose, CA 95124
|
Tuner Upperr Schematic
6 Meter Modification Schematic
